Archive for November 2022
Common Parts Used in Fire Sprinkler Systems
What are the different parts used in fire sprinkler systems? As a business owner, you must be able to keep your property, employees, and customers safe while they remain on the premises. And one of the most important things you have to keep your assets safe from is a possible fire hazard.
The risk of a fire hazard is always looking over a company, especially one that deals in flammable materials. Without an effective fire protection system, employees will not feel safe working in the company, and other assets will not be safe.
But before you can install an effective fire protection system throughout your business, you must first know about all the components that go into it. Learning about all of the components that go into fire protection systems can make it easier to set one up in your business. Although they will usually come in different types, fundamentally speaking, these protection systems work the same way.
So even though a system might have slightly different features, it will always consist of the following components.
The Most Common Parts of a Fire Sprinkler System
A fire sprinkler system doesn’t just allow you to suppress or extinguish the fire, but it can also give your employees a few extra seconds to escape the premises. The major components of these types of systems include:
Automatic Fire Sprinklers
The first common component in nearly every fire protection system available in the market is fire sprinklers. These devices spread water that reaches out in a radius. These sprinklers are intended to cover as much area as possible when spreading water through the premises.
There are two distinct ways that fire sprinklers operate. The first one is that the sprinklers will turn on individually, with one often being enough to suppress a fire. The second type of sprinkler will open all valves at once, flooding the room to prevent a fire. This system becomes especially important in smaller workplaces where the fire is likely to spread much faster.
Fire Alarm Sensors and Triggers
The next major part of a fire protection system is the many sensors and alarms that alert individuals about a fire. Sensors play a vital role in detecting a fire on the premises, and the alarms will notify people of a fire.
The alarms will often have a manual switch, which people can turn on to notify about an alarm. While most fire protection systems will come with alarms, sensors, and sprinklers, you can get them separately.
The Primary Power Supply
Fire alarms often require a power connection to operate effectively, which is why they depend on a wired connection. Some alarms can also run on batteries but are liable to shut down during crucial moments.
Most automatic fire sprinkler systems don’t need a sensor to start spreading water. Often, these sprinklers will come with an individual sensor that triggers the water flow as soon as the temperature reaches 135°F.
Exit Lights
Another common part of any fire protection system is the exit lights, which help people know where to run during a fire. These will often connect to the overall fire protection system.
Parts Used in Fire Sprinkler Systems: Conclusion
These major components make up your average fire protection system. While some might have other features or sensors, such as a carbon monoxide sensor, these are the fundamentals that every system needs.
If you’re looking for a licensed expert to design a code compliant fire sprinkler system, allow our experts at F2M to help. We have over 20 years of expertise in the field and have worked all over the USA.
Call today for a consultation.
F2M Fire & Drafting Designs Inc.
31 South Street, Suite 3S-4
Mount Vernon, NY 10550
(718) 928-3009
info@f2mfadds.com
https://www.f2mfadds.com/contact
All About Fire Sprinkler Wet Systems
What are fire sprinkler wet systems? A properly functioning fire sprinkler system is vital for preventing fire related accidents and protecting your property. According to a study, the National Fire Protection Association learned that properties with high quality sprinklers installed had lower death rates compared to buildings that didn’t have these systems.
That said, plenty of people need help choosing the right fire sprinkler system for their property. That’s because of the wide range of these systems. Essentially, there are two main types of fire sprinkler systems: wet and dry. These types have their sub variants, which have different features and purposes.
In this piece, we will discuss fire sprinkler wet systems, their uses, advantages, and what makes them different from their dry fire sprinkler system counterparts.
What You Need to Know About Wet Sprinkler Systems
Dry and wet sprinkler systems are made to suppress fires. However, both have different functionalities and ways of operating. In wet fire sprinkler systems, sprinkler heads are usually directly attached to pipes. These pipes contain pressurized water and release it whenever the system detects fire. Upon detection, the sprinkler heads go off automatically and put the fire down immediately.
These systems are quite practical, and most places can benefit from installing them. What’s more, wet sprinkler systems offer protection against fire, helping protect people and the property where it occurs. These systems must be tested and inspected according to the NFPA25 to ensure they can function effectively.
How are Dry Systems Different from Wet Ones?
Like wet systems, dry systems have sprinkler heads directly attached to the piping. The main difference between the two is that the pipes in dry sprinkler systems contain pressurized air or nitrogen for holding water pressure back at the primary control location.
Whenever dry sprinkler systems detect fire, the relevant head fuses, depleting air pressure from the pipe, ensuring the water pressure overrides air pressure. It helps to fill up the entire piping network with water. Once that happens, the water makes its way toward the sprinkler heads to extinguish the fire. While wet systems are suitable for most places, dry ones are best for temperatures lower than forty degrees Fahrenheit. These include:
- Warehouses and buildings that lack sufficient heat
- Parking garages
- Places with exposed exterior areas that require fire protection
What Makes Wet Fire Sprinkler Systems so Popular?
As mentioned earlier, wet sprinkler systems maintain water within the piping. Once the sprinkler detects any sign of fire nearby, it activates and releases water to extinguish the fire. Here are some reasons why these systems are so popular:
Simple and Reliable
Since wet systems only have a few components, there are few items to crash or malfunction. Things like these make this system quite reliable and suitable for most locations. The simplicity also makes wet fire systems ideal for places with low system maintenance.
They Do Not Require Much Downtime.
Unlike dry systems, wet fire sprinkler systems have an incredibly short downtime after a fire. Plus, these systems require minimal effort and time to restore. Replacing the faulty sprinklers, followed by turning on the water supply, is enough to reinstate the system.
Fire Sprinkler Wet Systems: Final Thoughts
A wet fire sprinkler system can be a lifesaver and save you from spending a massive amount on repairs following a fire. Are you looking for reliable, high quality sprinkler system design and installation? If so, contact F2M Fire & Drafting Designs Inc. for a swift and effective solution that suits your specific needs and requirements.
F2M Fire & Drafting Designs Inc.
31 South Street, Suite 3S-4
Mount Vernon, NY 10550
(718) 928-3009
info@f2mfadds.com
https://www.f2mfadds.com/contact